Tech Trends
Home » HOW TO » How to Hack Spectranet & InterC Huawei MiFi Modem

How to Hack Spectranet & InterC Huawei MiFi Modem

Before now, many people have found it difficult to hack some certain modem just because it is been built on just the network. this is how you can hack Huawei 4G MiFi with the Model Number E5573s-320 and E5573s-606 MiFi modem.  You can now hack Spectranet and InterC Huawei Modem because it falls within this categories.

 

Hack

 

Hacking your Huawei 4G MiFi router with E5573s-320 & E5573s-606 will enable you to enjoy 4G network sim such as  ntel, SMILE, Swift InterC etc. Note, if your don’t have the specified Model which has been mentioned above, just let it go.

Also Read: How To Get Windows 1o Missed Calls Alert  On Your Pc

Your Requirements!!!

  • Huawei Mobile Partner
  • Latest HiLink Drivers
  • Latest Huawei HiLink driver V5
  • Huawei E5573s-606 firmware version
  • Huawei E5573s-320 firmware version
  • Huawei code calculator
  • Universal master code generator
  • Do well to charge your Huawei MiFi Modem (Spectranet, InterC)

Follow the Below steps to hack your device.
Step 1: you should be able to Unzip the Huawei hiLink drivers and install them on your PC. Once your installation is complete, reboot your PC so that the drivers can be fully updated with your PC.

Step 2: Unzip launch the universal master code generator, put in your imei then click on generate

Step 3: Copy the flash code(to notepad) from the imei generated which will serve as your password

Step 4:  After that then Insert an unsupported sim into your (Huawei E5573s-606) or (E5573s-320) router and connect it to your PC via USB cable.

Step 5: Unzip the Huawei E5573s-606 firmware you downloaded and go to the folder where “Prod&Serv&Cust”, run the file P711S.

Step 6: It will request for password, input the flash code you copied to your notepad as password and click the ok button, then Wait patiently for the installation to finish.  bear it in mind that you must not disconnect your usb cable, and most especially, your PC must not shot down because it is risky.

Step 7: Once the process has been successfully completed, extract and launch Huawei code calculator

Step 8: After that you will then Click on the read tab to generate your unlock code as will be display on the result field ()

Step 9: Unzip and open the second Huawei E5573s-320 firmware you downloaded earlier, run the E5573_Update_21.180.17.00.00.exe.

Step 10: Once the update is complete, go to your Huawei mobile partner interface, settings select network settings, and pop up to insert and your unlock code will appear.

Step 11: Then Enter the unlock code you got  in step 8 and your Huawei mifi router will be unlocked.

Its just as simple as that because you can now enjoy your 4G network chip in your MiFi router.

About Joshua Lincoln

Technical Writer, Security Blogger and IT Analyst. He is a Technology Enthusiast with a keen eye on the Cyberspace and other tech related developments.

Leave a Reply

Your email address will not be published. Required fields are marked *

*